Applicable PC Board Dimensions: Max. 508x381 mm
Max. tact time: 0.12 s/point
No. of Part Inputs: 120 inputs (60 + 60)
Insertion Angle: 4 angles (X, Y, -X, -Y)
Panasonic inserter AVK3
Specifications:
Dramatic improvement in productivity is realized by high-speed insertion at 0.12 s/component.
The following also contribute to improve the productivity;
1)Feeder carriage 1 feeder movement within a tact time of 0.12 s/component.
2)The extended distance traveled by XY table within a tact time of 0.12 s/component.
3)Reduction of time required for insertion of jumper wire in Y direction (Approx. 10% improvement compared with the previous machine, AVK2B).
Random access system enables an operator to carry out operation with the touch of a button.
The highly increased productivity of AVK3 (3 times as high as those of AE, AV and AVB) also realizes significant reduction in insertion cost (and moreover in power and air consumption).
Improved operability
The machine provides operation guidance on the LCD, thus enabling interactive operation. (Switchable between Japanese and English on the screen)
Information needed by the operator for production management (error messages, production management information etc.) is displayed on the monitor and can be printed out.
Adoption of global transformer
Global transformer applicable to 200, 220, 380, 400, 420 and 480 V comes as standard. (No external transformer is necessary.)
Model | ||||
1 |
Applicable Electronic Parts | Taped axial lead parts (carbon resistor, cylindrical ceramic capacitor, solid resistor, diode and taping jumper wire) Jumper wire (optional) = = Refer to `Insertion Part Specifications` in this section for part dimensions. | ||
2 |
No. of Part Inputs | 1. Taping width 26 mm • 120 inputs (60 + 60) + Reel type jumper wire (optional) 2. Taping width 52 mm (Pack width: Max. 80) • 120 inputs (60 + 60) + Reel type jumper wire (optional) 3. Taping width 26 mm and 52 mm can be used. | ||
3 | Part Packaging | Flat pack | ||
4 | Insertion Angle | 4 angles (X, Y, -X, -Y) | ||
5 |
Insertion Tact Time | Max. tact time: 0.12 s/point Max. tact time conditions according to part type and insertion angle ApplicablepartInsertion angle Axial lead part Jumper wireX direction (0°)0.15 s/point0.12 s/pointY direction (90°)0.12 s/point0.15 s/point-X direction (180°)0.15 s/point⎯-Y direction (270°)0.24 s/point⎯Other conditions for max. tact time (0.12 s/point) XY table movement: Max. 35 mm for X, 39.5 mm for Y (However, within 30 mm for X, 34 mm for Y when there are parts above 3 mm high on the PC board.) | ||
6 | Pitch Switchover within the Tact | 5.3 mm within the tact (0.12 s/part) | ||
7 | Direction of PC Board Flow | Right to left | ||
8 | PC Board Replacement Time | Approx. 2 s | ||
9 | Applicable PC Board Dimensions | Max. 508x381 mm | Min. 50x50 mm | *1, 2, 3 |
10 | Insertion Area | Max. 508x371 mm | Min. 50x40 mm | |
11 | Insertion Pitch | 5 to 26 mm (Can be set freely by 0.01 mm increments.) 5 to 26 mm for jumper wire (optional) | ||
12 | Insertion Height | Insertion height programmable according to the part diameter and lead diameter | ||
13 | Part Fixing System | Cut and Clinch system (piezoelectric detection system) | ||
14 | Clinching Angle | 15° to 30° inner clinching | ||
Keywords:
Panasonic inserter NPM-VF, Panasonic AI Radial inserter RHS2B, Panasonic Vertical inserter RH5, Panasonic inserter RG131, Panasonic pick and palce machine, Panasonic Inserter, Panasonic Printer, Panasonic Assembly Line, SMT Equipment, Panasonic Feeder, Panasonic Nozzle, Panasonic Spare parts, Panasonic AI Spare parts.
Contact: Tommy
Phone: +86 13691605420
E-mail: sales@flason-smt.com
Add: No.94,Guangtian Road,Songgang Street,Bao an District Shenzhen China
